AusNet Services is installing leading-edge technology across its electricity network to reduce the risk of powerline-related bushfires.
The technology, known as Rapid Earth Fault Current Limiter or REFCL, is being installed in selected hazardous bushfire risk areas.
It is estimated that REFCLs could cut powerline fires in Victoria by about 50 per cent, according to the Victorian Government’s Powerline Bushfire Safety Taskforce.
This initiative is mandated by the Victorian Government and is part of a broader Powerline Bushfire Safety Program aimed at improving safety across Victoria’s power network.
Other work aimed at reducing the number of fires started by electricity assets includes:
Undergrounding or covering of powerlines in very high-fire risk areas;
More frequent inspections and maintenance; and
Intensified vegetation management and clearing programs.
AusNet Services will install REFCLs in 22 locations in outer Melbourne and across northern and eastern Victoria.
In 2016, the first REFCL was installed at the Woori Yallock zone substation servicing the surrounding areas including Warburton and Healesville. It began operating early in 2017.
The map below shows where REFCLs will be installed.
All Tranche 1 sites are now operational and operated on its highest setting on TFB days during summer.
This new technology is designed to reduce bushfire risk across the network. In some instances power will need to be temporarily cut to install and test the technology safely. This will affect some households and businesses at different locations across the selected regions.
AusNet Services will notify customers well in advance of any planned outages. Customers can also keep informed through AusNet Services’ Outage Tracker, which provides detailed information about power interruptions, including expected restoration time.
Customers will also receive outage updates via SMS if they have registered their mobile number with their electricity retailer. Once the technology is installed, the devices will undergo testing. During this phase, there is a small possibility there may be unplanned power interruptions.
When REFCLs are operating, customers might experience more outages on Total Fire Ban days or Code Red days. On these days, the technology will shut down sections of the network where an earth fault is detected to reduce the risk that the fault causes a fire. Crews will be on standby to fix faults as quickly as possible.
A REFCL is a type of electricity network protection device that operates similar to a safety switch on AusNet Services’ electricity distribution network.
It was originally developed for its reliability benefits in Europe. In Victoria, however, it will be used to help reduce the risk of bushfires. Trials of the technology were conducted in 2014 and 2015.
As the name suggests, the REFCL limits the amount of energy released when an earth fault occurs on a powerline.
An earth fault occurs when a connection is made between a powerline and the ground. This could occur as a result of a fallen powerline, a tree falling against a powerline or wildlife touching the pole and powerline at the same time.
When a fault occurs, a REFCL detects and significantly limits the energy flow within a tenth of a second. This reduces the possibility of a fire being started, or of a person or animal nearby receiving an electric shock.
If the fault is able to fix itself quickly (for example a tree branch that had touched the power line then falls away), customers will not be affected. Currently, without a REFCL, these faults can cause power to turn off for several minutes, lead to fires or even property damage. If the fault remains (for example a tree has fallen on a line or a car has hit a powerpole) then all power will be cut around the fault area.
If you have any other questions about this program, please contact us on 1300 360 795 or firstname.lastname@example.org.
You can download the information about the REFCL Program as a PDF Fact Sheet.
The REFCL operates on the 22 kV electricity distribution network which is the network used to supply electricity to High Voltage (HV) customers.
In the absence of a HV customer taking any action prior to REFCLs being put into service, it is possible that their HV electrical assets will fail.
The revised Electricity Distribution Code (EDC) came into effect on 20 August 2018 following the Essential Service Commission’s Review of Voltage Standards. The revised EDC placed the obligation on HV customers to undertake works, at their own expense, to be able to withstand REFCL operations.
The following fact sheets provide information about what a HV customer needs to do to assess and implement solutions so they are able to withstand REFCL operations:
Please refer to our HV Customer Policy for REFCL protected Networks
If you have any questions about HV customer-related matters, please email us: HVcustomers@ausnetservices.com.au.
For further information about Victoria's State Government initiative to support HV customers, please refer to the High Voltage Network Assets Program.
Or you can send an email requesting further information to HCAP@delwp.vic.gov.au.